Ningbo Ration Machanical Equipment Co., Ltd
Nhà> Blog> Commonly used route for machining parts on CNC lathes (2)

Commonly used route for machining parts on CNC lathes (2)

February 21, 2023

(3) Analysis of axial feed distance during threading



(4) Analysis of the route of the grooving

When a rectangular groove with a low turning accuracy and a narrow width is used, a grooving knife having a blade width equal to the groove width can be used to feed the vehicle in one straight direction by the straight forward method. The groove with higher precision is generally used for secondary feed, that is, when the first time the groove is fed, the remaining amount of the car is left on both sides of the groove wall, and the second feed is trimmed with a uniform knife.

The wider groove of the car can be cut by multiple straight-through methods, and the finishing allowance is left on the groove wall and the bottom surface, and the last one is finished to the size.

As shown in Figure 6.

Previous page

Contal chúng tôi

Tác giả:

Ms. Wendy

Phone/WhatsApp:

+8618158277572

Sản phẩm được ưa thích
Bạn cũng có thể thích
Danh mục liên quan

Gửi email cho nhà cung cấp này

Chủ đề:
Thư điện tử:
Tin nhắn:

Tin nhắn của bạn MSS

Contal chúng tôi

Tác giả:

Ms. Wendy

Phone/WhatsApp:

+8618158277572

Sản phẩm được ưa thích
LIÊN HỆ CHÚNG TÔI

Bản quyền © 2024 Ningbo Ration Machanical Equipment Co., Ltd tất cả các quyền.

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Gửi